|
Click On Picture
|
Hot Break Single Shell Tank-1,200 Gallons
|
Mfg: Not Specified
|
Model:
|
Stock No: CA119a.4
|
Serial No:
|
Hot Break Single Shell Tank- 1,200 Gallon. 316 Stainless steel construction. Temperature coil inside tank. Belt- driven pulleys. Inlet: (1) 4 in. on side. Outlet: (1) 4 in. Inside dimensions: 72 in. dia. x 73 in. H. Overall dimensions: 142 in. L x 72 in. W x 100 in. H.
|
Click here for more information (207.7 KB)
|
|
Click On Picture
|
General Mills Stainless Steel Tank/Hopper- 2500 Gallon
|
Mfg: General Mills
|
Model:
|
Stock No: SGMI250b.31
|
Serial No: 1057099
|
General Mills Stainless Steel Tank/Hopper- 2500 Gallon. S/N: 01057099. Inlets: (1) 1-1/2 in. dia. S-line, (1) 2-1/2 in. dia. pipe, (1) 3 in. dia. threaded fitting, (2) 19-1/2 in. diameter clamp ports. Outlets: (1) 43 in. dia. outlet with a 50 in. dia. flange and (8) 5/8 in. dia. attachment holes at a center-to-center distance of 46 in. Overall dimensions: 91 in. dia. x 18 ft. 4 in. H.
|
Click here for more information (201.8 KB)
|
|
Click On Picture
|
Stainless Steel Single Shell Tank - 2,500 Gallon
|
Mfg: Not Specified
|
Model:
|
Stock No: UGHB004.
|
Serial No:
|
Stainless Steel Single Shell Tank-2,500 Gallon. 304 stainless steel construction. Wall thickness: 0.105 in. Inside straight wall dimensions: 7 ft. 1 in. dia. x 7 ft. 10 in. Manhole cover diameter: 18 in. Tank is equipped with a Cherry-Burrell pneumatic discharge valve. Product Outlet is 2.5 in. ACME thread with a 13 in. centerline height from ground. Inlets: (1) 3 in. dia. ACME fittings, (1) 2 in. dia. ACME fittings, (1) 2-1/2 in. dia. port. Outlets: (1) 1-1/2 in. dia. port, (1) 2-1/2 in. dia. ACME port. Overall dimensions: 88 in. dia. x 9 ft. 8 in. H.
|
Click here for more information (128.6 KB)
|
|
Click On Picture
|
Stainless Steel Single Shell Vertical CIP Tank- 1500 Gallon
|
Mfg: Not Specified
|
Model:
|
Stock No: DTTC2026.
|
Serial No:
|
(2) Stainless Steel Single Shell Vertical CIP Tank- 1500 Gallon. Side-mounted sight glass. (3) Level indicator probes. 18 in. dia. manway. Inlets: (1) 1 in. dia. 150lb ANSI flange, (1) 2 in. dia. 150lb ANSI flange, (1) 6 in. dia. ports, (3) 10 in. dia. ports. Outlets: (1) 8 in. dia. flanged port with butterfly valve, (1) 10 in. dia. flanged port. Originally installed at Tropicana. These CIP tanks contained caustic solutions and were removed when that division was closed. Overall dimensions: 6 ft. 6 in. L x 6 ft. 2 in. W x 13 ft. 4 in. H.
|
Click here for more information (282.5 KB)
|
|
Click On Picture
|
Stainless Steel Single Shell Insulated Tank- 1000 Gallon
|
Mfg: Not Specified
|
Model:
|
Stock No: DTTC2037.
|
Serial No:
|
Stainless Steel Single Shell Insulated Tank. Capacity: 1000 gal. Manway diameter: 18 in. Dividing baffle: 4 ft. 11 in. W x 5 ft. H. Inlets: (2) ½ in. dia. FNPT (thermowells), (2) 4 in. dia. ports. Outlets: (1) 2 in. dia. NPT (drain), (1) 3 in. dia. vent, (2) 4 in. dia. ports, (2) 4 in. dia. ports with butterfly valves. Overall dimensions: 8 ft. 10 in. L x 6 ft. 2 in. W x 9 ft. 8 in. H.
|
Click here for more information (219.9 KB)
|
|
Click On Picture
|
2002 Permian Fabrication & Service Vertical Stainless Steel Heated Tank - 1000 Gallons
|
Mfg: Permian Fabrication & Service
|
Model:
|
Stock No: GANF138.20
|
Serial No: 3132-D
|
2002 Permian Fabrication & Service Vertical Stainless Steel Heated Tank. Approximate capacity: 1000 gallons. Shell thickness: 10 gauge. Head thickness: 10 gauge. Inside straight wall dimensions: 4 ft. 6 in. Dia. x 9 ft. L. Number of coil rows: 7. Coil size: 2 in. Inlets: (2) 2 in. dia. ports, (1) 3/4 in. dia. port, (2) 1 in. dia. ports. Outlets: (1) 2 in. dia. port, (1) 1 in. dia. port, (1) 4 in. opening on top for shaft. Overall dimensions: 6 ft. L x 6 ft. W x 13 ft. 4 in.(ACN350).
|
Click here for more information (255.6 KB)
|
|
Click On Picture
|
Alloy Products Lifetyme Atmospheric Tank - 1,000 Gallons
|
Mfg: Alloy Products
|
Model: 6299
|
Stock No: SPPP295.3a
|
Serial No: 2148-E
|
Alloy Products Lifetyme Atmospheric Tank - 1,000 Gallons. Model: 6299. S/N: 2148-E. Tank pressure: 15 psi. Jacket pressure: none. Completely CIP'able. Side-mounted propeller intensifies product mixing. Inlets: (1) 1-1/2 in. dia. port (sprayball), (2) 3 in. dia. threaded fittings. Outlets: (2) 1 in. dia. threaded fittings, (2) 1 in. dia. NPT (female), (1) 2 in. dia. valve (discharge). Overall dimensions: 79 in. L x 75 in. W x 102 in.H.
(HB1).
|
Click here for more information (261.9 KB)
|
|
Click On Picture
|
SOLD Bottom Jacketed Single Shell Vertical Tank - 2,000 Gallon
|
Mfg: Not Specified
|
Model:
|
Stock No: HD-SC194.
|
Serial No:
|
Stainless Steel Bottom-Jacketed Single Shell Vertical Tank- 2,000 Gallon. Tank is equipped with a Spirax/Sarco steam valve, (2) thermowells, center sprayball, and liquid level indicator. Manways: 14 in. dia. top, 20 in. L x 16 in. W side, oval. Jacket wraps around 2 in. of tank bottom. Inlets: (1) 1-1/2 in. dia. Q-line for jacket, (1) 2 in. dia. Q-line fitting. Outlets: (1) 1-1/2 in. dia. Q-line for jacket, (1) 2-1/2 in. dia. Q-line fitting, (1) 3 in. dia. Q-line fitting. Overall dimensions: 67 in. dia. x 15 ft. 4 in. H. SOLD
|
Click here for more information (215.4 KB)
|
|
Click On Picture
|
SOLD Royal/Globe Single Shell Holding Tanks- 2,000 Gallon
|
Mfg: Royal/Globe
|
Model: 7833/2000
|
Stock No: SSUS002.
|
Serial No: TC-29 & TC-28/3500
|
(2) Royal/Globe Single Shell Holding Tanks- 2,000 Gallon. Models: 7833/2000. S/N's: TC-29 & TC-28/3500. Stainless steel construction. All tanks feature a 16 in. dia. floater and a 21 in. dia. manway. Tanks rest on: 8 ft 8 in. L x 16 in. W x 35 in. H supports. Inlets: (1) 1-1/2 in. dia. NPT (female-vent tube), (1) 4-1/2 in. dia. pipe with a 9 in. dia. flange and (8) 3/4 in. dia. attachment holes at a center- to-center distance of 7-1/2 in. Outlets: (1) 2 in. dia. NPT (female-tank). Overall dimensions: 95 in. L x 84 in. W x 80 in. H. SOLD
|
Click here for more information (221.5 KB)
|
|
Click On Picture
|
SOLD Stainless Steel Tank-3,000 Gallons
|
Mfg: Not Specified
|
Model:
|
Stock No: CCFP507.
|
Serial No:
|
Stainless Steel Tank- 3,000 Gallons. 113 in. dia. x 72 in. H. Scrapers- (4) 60 in. welded to sides of tank. Mounting bracket across top of tank: 113 in. L x 18 in. W x 4 in. H. Outlet- 2 in. Overall dimensions: 113 in. dia. x 87 in. H (includes bracket). SOLD
|
Click here for more information (134.6 KB)
|
|
Click On Picture
|
SOLD Stainless Steel Single Shell Vertical Tank- 1,250 Gallon
|
Mfg: Not Specified
|
Model:
|
Stock No: RCPK586.7a
|
Serial No:
|
Stainless Steel Single Shell Vertical Tank- 1250 Gallon. 316 Stainless steel. Inside dimensions (straight wall): 72 in. dia. x 72 in. H. Center bridge and flip-top lid. Cone bottom. Inlets: (1) 1/2 in. NPT (female), (1) 3/4 in. dia. NPT (female), (1) 1 in. dia. NPT (female), (1) 2 in. dia. NPT (female), (2) 2 in. dia. with a 6 in. dia. flange with (4) 3/4 in. dia. bolt holes at a center-to-center distance of 3-1/4 in., (1) 3 in. dia. NPT (female), (1) 6 in. dia. port. Outlets: (4) 2 in. dia. with a 6 in. dia. flange with (4) 3/4 in. dia. bolt holes at a center-to-center distance of 3-1/4 in. Overall dimensions: 78 in. L x 76 in. W x 102 in. H. SOLD
|
Click here for more information (154.3 KB)
|
|
Click On Picture
|
SOLD Apotter Rayfield Single Shell Tank- 1,000 Gallon
|
Mfg: Apotter Rayfield
|
Model:
|
Stock No: 45-R557-A
|
Serial No:
|
Apotter Rayfield Single Shell Tank- 1,000 Gallon. Model M. Center bridge with lift top covers. Outlet: 2 in. npt. Side mounted propeller agitation. Painted mild steel legs. SOLD
|
|
|
Click On Picture
|
SOLD Tank Single Shell Stainless Steel - 1,000 Gallon
|
Mfg: Not Specified
|
Model:
|
Stock No: 40.SS136.5
|
Serial No:
|
Stainless steel tank, 1,000 gallon, single shell, cone bottom, 8 inch outlet, 2 - 8 inch inlets, 12 inch manhole, slight dome top, 94 inch height x 64 inch diameter.
SOLD
|
|
|
Click On Picture
|
SOLD Single Wall Tank Stainless Steel 2800 Gallon
|
Mfg: Not Specified
|
Model:
|
Stock No: SFF602.12
|
Serial No:
|
Domed top, domed bottom 2,800 gallon stainless steel single shell tanks, 11 ft.3 in. tall (tank sidewall plus domed top and bottom) plus legs and agitator, 7 ft. diameter.
Gear box Falk, Model 21-4ebz4-16a7, mo# 6010 -0804, input rpm 1,750 output 11, ratio 158.6, size 2 in., 184 hp date 4/60 electric motor 3 hp.
SOLD
|
|
|
Click On Picture
|
SOLD Single Wall Tank Stainless Steel 2800 Gallon
|
Mfg: Not Specified
|
Model:
|
Stock No: SFF601.12
|
Serial No:
|
Domed top, domed bottom 2,800 gallon stainless steel single shell tanks, 11 ft.3 in. tall (tank sidewall plus domed top and bottom) plus legs and agitator, 7 ft. diameter.
Gear box Falk, Model 21-4ebz4-16a7, mo# 6010 -0804, input rpm 1,750 output 11, ratio 158.6, size 2 in., 184 hp date 4/60 electric motor 3 hp.
SOLD
|
|
|
Click On Picture
|
SOLD Tank Single Shell Stainless Steel - 1,200 Gallon
|
Mfg: Not Specified
|
Model:
|
Stock No: 3R-2416.9a
|
Serial No:
|
Stainless steel tank, single shell, 1,200 gallon. Dimensions: 6 foot diameter x 6 diameter high with 2 inch butterfly outlet and a flip top cover.
SOLD
|
|
|
Click On Picture
|
SOLD Tank Single Shell Stainless Steel - 1,500 Gallon
|
Mfg: Not Specified
|
Model:
|
Stock No: 55.133
|
Serial No:
|
Stainless steel tank, single shell, 1,500 gallon with flip top lid, flat top, sloped bottom, single shell, 5 - 3 inch inlets and 3 inch and 2 inch outlets, 72.5 height x 78 inch diameter, 28 inch legs.
SOLD
|
|
|
Click On Picture
|
SOLD Tank Single Shell Stainless Steel - 1,500 Gallon
|
Mfg: Not Specified
|
Model:
|
Stock No: 20.301
|
Serial No:
|
Stainless steel tank, single shell, 1,500 gallon closed flat top sloped bottom, 64in x 19in lid (top) 76in D x 79in H 3in center out 18in legs.
SOLD
|
|
|
Click On Picture
|
SOLD Tank Single Shell Stainless Steel - 1,200 Gallon
|
Mfg: Not Specified
|
Model:
|
Stock No: D2
|
Serial No:
|
Stainless steel single shell tank 1,200 gallon with measurement of 68 inch diameter x 68 inch high, dish top and bottom with 4 inch outlet and Lightning mixer.
SOLD
|
|
|
Click On Picture
|
SOLD Tank Single Shell Stainless Steel - 1,200 Gallon
|
Mfg: Not Specified
|
Model:
|
Stock No: D1
|
Serial No:
|
Stainless steel single shell tank 1,200 gallon with measurement of 68 inch diameter x 68 inch high, dish top and bottom with 4 inch outlet.
SOLD
|
|
|
Click On Picture
|
SOLD Tank 1,500 Gallon
|
Mfg: Chem Tek
|
Model:
|
Stock No: HRN02
|
Serial No: 23720-3
|
Tank 1,500 Gallon, S/N 23720-3, no legs. (2) 2 in. inlets, (1) 2 in. outlet. Inside dimensions 76 in. diameter x 80 in. H. Outside dimensions: 80 in. L x 84-1/2 in. W, 85 in. H.
SOLD
|
Click here for more information (137.3 KB)
|
|
Click On Picture
|
SOLD Tank Single Shell Stainless Steel - 1,500 Gallon
|
Mfg: Not Specified
|
Model:
|
Stock No: 56.3R-2192.4
|
Serial No:
|
Stainless Steel Single Shell Tank, 1,500 gallons, open top with elevated cover, lightnin mixer, and 3 in. bottom center outlet. Reliance motor, 3/4 hp, 230/460 volts, 3.44/1.72 amps, 3 phase, 60 hz, 1,725 rpm. Inside dimensions 78 in. diameter x 73 in. H, Overall dimensions 81 in. diameter x 124 in. H.
SOLD
|
Click here for more information (112.7 KB)
|
|
Click On Picture
|
SOLD Single Wall Tank Stainless Steel-2800 Gallon
|
Mfg: Not Specified
|
Model:
|
Stock No: SFF600.12
|
Serial No:
|
Single Wall Stainless Steel 2,800 Gallon Tank with motor, transmission, and agitator. Allis Chalmers motor information, 15 hp, 1,750 rpm, 208/220/440 volt, 38.6-38.6/19.3 amps, Model Flex transmission, Gear Ratio, 31.4 output 56 rpm, service 10.6 hp, 1,750 rpm. Inside dimensions 48 in. diameter x 143 in. H. Agitator paddle 28 in. L x 8 in. W, it has (4) paddles 51 in. diameter, one smaller on the bottom is 16 in. L, 4 in. W, 37 in. D. It has (8) wave stopper blades 6 in. W x 48 in. L, (5) inlets on top, (4) of them are 1-1/2 in., Bottom outlet 2 in. Overall dimensions 100 in. diameter x 20 ft. H.
SOLD
|
Click here for more information (280.3 KB)
|
|
Click On Picture
|
SOLD Single Wall Tank Stainless Steel 3,000 Gallon
|
Mfg: Not Specified
|
Model: mdv150
|
Stock No: SFF599.12
|
Serial No: 2176
|
Single Wall Stainless Steel 3,000 Gallon Tank with motor, transmission, and agitator. Allis Chalmers Motor information, Serial 51-460-320, 15 hp, 1750 rpm, 208/220/440 volt, 38.6-38.6/19.3 amps, Model Flex transmission, Gear Ratio, 31.4 output 56 rpm, service 10.6 hp, 1750 rpm. Inside dimensions 84 in. diameter x 144 in. Deep. Agitator paddle 28 in. L x 8 in. W, it has (4) paddles 51 in. diameter, one smaller on the bottom is 16 in. L, 4 in. W, 37 in. D. It has (8) wave stopper blades 6 in. W x 48 in. L, (5) inlets on top, (4) of them are 1-1/2 in., Bottom outlet 2 in. Overall dimensions 100 in. diameter x 20 ft. H.
SOLD
|
Click here for more information (272.3 KB)
|
|
Click On Picture
|
SOLD Single Wall Tank Stainless Steel 3,000 Gallon
|
Mfg: Not Specified
|
Model: 21 - 4EBZ4-16A7. M.O 6010-0804
|
Stock No: SFF604.12
|
Serial No:
|
Single Wall Tank, Stainless Steel-3,000 Gallon. Motor with gearbox control. Drive information Model 21 - 4EBZ4-16A7. M.O 6010-0804, Date 4/60, Input 1,750 rpm, Output 11 rpm, ratio 158.6, Rating 184 hp. Falk Enclosed Gear Drive, ID no. P14x3237N-XR, 2 hp, 230/460 volt, 5.4/2.7 amps, 1,725 rpm, 40 def C. amb, continuous duty, 60 hz. (4) Legs 39 in. H. 84 in. diameter x 144 in. Deep. Overall dimensions 100 in. diameter x 18 ft. H.
SOLD
|
Click here for more information (144.6 KB)
|
|
Click On Picture
|
SOLD Single Wall Tank Stainless Steel 3,000 Gallon
|
Mfg: Not Specified
|
Model: 21 - 4EB24-16A7. M.O 6010-0804
|
Stock No: SFF603.12
|
Serial No:
|
Single Wall Tank, Stainless Steel, 3,000 gallon. Motor with gearbox control. Drive information Model 21 - 4EB24-16A7. M.O 6010-0804, Date 4/60, Input 1750 rpm, Output 11 rpm, ratio 159.6, Rating 184 hp. Falk Enclosed Gear Drive, ID no. P14x3237N-XR, 2 hp, 230/460 volt, 5.4/2.7 amps, 1,725 rpm, 40 def C. amb, continuous duty, 60 hz. (4) Legs 39 in. H. Inside dimensions 84 in. diameter x 144 in. Deep. Overall dimensions 100 in. diameter x 18 ft. H.
SOLD
|
Click here for more information (137.7 KB)
|
|
Click On Picture
|
SOLD Tank Single Shell - 1,800 Gallon
|
Mfg: Not Specified
|
Model:
|
Stock No: 329
|
Serial No:
|
Single Shell Tank-1,800 Gallon. Inside dimensions 66 in. diameter, 106 in. H. (119 in. at center). Inlets at (2) 2 in., (1) 3 in., (1) 4in., (1) 6 in., (1) 1-½ in. (w/ball valve). Outlets (1) 4 in. 4 legs at 20 in. Overall dimensions 74 in. W, 74-½ in. L, 140 in. H.
SOLD
|
Click here for more information (172.1 KB)
|
|
Click On Picture
|
SOLD Dome-Top Vertical Tank 4,000 Gallons
|
Mfg: Not Specified
|
Model:
|
Stock No: CCFP161.
|
Serial No:
|
Dome-Top Vertical Tank 4,000 Gallons. Stainless steel. With Vertical Mixer and Side Man Door.
SOLD
|
|
|
Click On Picture
|
SOLD Perma-San Single Shell Tank-1000 Gallon
|
Mfg: Perma San
|
Model: 1000-OVS
|
Stock No: HEC006.
|
Serial No: 16285-1
|
Perma-San Single Shell Tank-1000 Gallon. Model: 1000-OVS. S/N: 16285-1. 316 stainless steel. 2-piece removable top covers, sloped bottom, prop-style mixer mounted on mild steel bridge, adjustable mild steel legs with ball feet. Lightnin Mixer, Model: NLDG100, S/N: 714799. Lightnin Motor, 3 hp, 1740 rpm, 230/460 V, 9.2/4.6 amps, 60 Hz, 3 phase. Inlets: (1) 2 in. dia. pipe. Outlets: (1) 1-1/2 in. dia. threaded from tank, (1) 1/2 in. dia. thermowell. Overall dimensions: 76 in. L x 72 in. W x 10 ft. 4 in. H.
SOLD
|
Click here for more information (260.4 KB)
|
|
Click On Picture
|
SOLD Insulated Tank - 3,300 Gallon
|
Mfg: Not Specified
|
Model:
|
Stock No: 30.CNEM.347
|
Serial No:
|
3300 Gallon Insulated Tank, stainless steel single shell, top flanged inlet 10 - 1/2 in ID and 16 in OD, 36 in Legs, 7 in top viewport, 20 in manway, 2 in top fitting, 96 in Diameter x 106 in L.
SOLD
|
|
|
Click On Picture
|
SOLD Redewald Storage Tank - 3,600 Gallon
|
Mfg: Redewald
|
Model:
|
Stock No: 44
|
Serial No: 20541
|
Redewald 3600 Gallon Storage Tank, S/N 20541, 2300 lbs, 2 in. inlet 4.5 in. outlet, 14 ft. H. x 10 ft. Dia.
SOLD
|
|
|
Click On Picture
|
SOLD Single Shell Tank-1,200 Gallon
|
Mfg: Not Specified
|
Model:
|
Stock No: 35.300
|
Serial No:
|
Single Shell Tank- 1,200 Gallon. Stainless Steel. Inlets: (2) 3 in., (2) 2 in., (1) 1-½ in., (1) 1 in. Outlets: (1) 2 in. (butterfly valve). Center bridge with two flip top lids, and mount for agitator/motor on side. (5) Legs: 2 in. H. Inside dimensions: 72-1/2 in. dia. x 71-1/2 in. H.
SOLD
|
Click here for more information (177.3 KB)
|
|
Click On Picture
|
SOLD Single Shell Stainless Steel Tank-1000 Gallon
|
Mfg: Not Specified
|
Model:
|
Stock No: JME4
|
Serial No:
|
Single Shell Stainless Steel Tank-1000 Gallon. Manway: 18 in. dia. (4) Legs: 2 ft. 7 in. H. Tank dimensions: 5 ft. 5 in. dia x 7 ft. 2 in. H. Inlets: (1) 1-1/2 in.; (1) 1-3/4 in. Outlet: 2 in. tri-clamp. This tank was a processor but there is an implosion on the inside and a dent on the outside. Now only suitable as a single shell tank.
SOLD
|
Click here for more information (318.4 KB)
|
|
Click On Picture
|
SOLD Stainless Steel Single Shell Tank- 4,000 Gallon
|
Mfg: Not Specified
|
Model:
|
Stock No: HDTD097b.8a
|
Serial No:
|
Stainless Steel Single Shell Tank- 4,000 Gallon. Manway: 20 in. W x 16 in. H. Dual sprayballs for CIP cleaning. Inlets: (1) 1-1/2 in. dia. pipe (sprayballs), (2) 3 in. dia. pipes (product), (1) 3 in. dia. S-line fitting (product). Outlets: (1) 2 in. dia. bevel fitting with hex nut (tank), (1) 3 in. dia. S-line fitting (tank). (2) 44 in. L x 4-1/2 in. W rectangular openings on top for black light sterilization. Thickness is about .165 in. or about 8 gauge. Previously used to store powdered sugar. Overall dimensions: 101 in. dia. x 10 ft. 5 in. H.
SOLD
|
Click here for more information (263.5 KB)
|
|
Click On Picture
|
SOLD Stainless Steel Single Shell Tank- 1100 Gallon
|
Mfg: Not Specified
|
Model:
|
Stock No: OI226.
|
Serial No:
|
Stainless Steel Single Shell Tank- 1100 Gallon. Inside dimensions: 70 in. dia. x 68 in. H. Manual TIG welded bottom. 20 in. dia. manway. Inlets: (1) 2 in. dia. S-Line fitting, (1) 2-1/2 in. dia. MPT. Outlets: 2 in. dia. FNPT attached to an Apollo ball valve. Overall dimensions: 85 in. L x 85 in. W x 87 in. H. SOLD
|
Click here for more information (232.6 KB)
|
|
Click On Picture
|
SOLD APV Crepaco Insulated Bottom and Side Sweep Mix and Blend Tank- 1,000 Gallon
|
Mfg: APV Crepaco
|
Model:
|
Stock No: UGHB016
|
Serial No: E-4842
|
APV Crepaco Insulated Bottom and Side Sweep Mix and Blend Tank- 1,000 Gallon. S/N: E-4842. Materials of construction: 304 stainless steel. Design temperature: 200ºF. Inside straight-wall dimensions: 6 ft. 1 in. dia. x 4 ft. 6 in. H. Dual spray balls for CIP cleaning. (2) Side sweepers, dimensions: 6 in. W x 3 ft. 10 in. H. (2) Bottom sweepers, dimensions: 3 ft. W x 4 in. H. Baffle dimensions: 8 in. W x 2 ft. 11 in. H. (1) 1 ft. 6 in. dia. manway. Inlets: (1) 2-1/2 in. dia. port, (1) 2-1/2 in. dia. S-line port, (1) 2 in. dia. S-line port, (1) 1-1/2 in. dia. sprayball port, (1) 3 in. dia. S-line port. Outlets: (1) 3 in. dia. S-line drain port. 2 in. Foam polyurethane/fiberglass insulation on the side and cone. Overall dimensions: 6 ft. 3 in. L x 6 ft. 3 in. W x 9 ft. H. SOLD
|
Click here for drawing (129.3 KB) Click here for more information (198.3 KB)
|
|
Click On Picture
|
SOLD Stainless Steel Single Shell Mix and Blend Vacuum Tank- 1,000 Gallon
|
Mfg: Not Specified
|
Model:
|
Stock No: CA125.5
|
Serial No:
|
Stainless Steel Single Shell Mix and Blend Vacuum Tank- 1,000 Gallon. Tank features heavy stainless side-walls that measure 0.28 inches with thickness tester. Inside straight-wall dimensions: 4 ft. 11 in. dia. x 7 ft. 6 in. H. Manway dimensions: 1 ft. 4 in. L x 12 in. W. Inlets: (1) 3/4 in. dia. FNPT, (1) 2 in. dia. FNPT. Outlets: (1) 1/2 in. dia. FNPT, (1) 2 in. dia. FNPT. Overall dimensions: 4 ft. 10 in. L x 4 ft. 10 in. W x 12 ft. 3 in. H. SOLD
|
Click here for more information (110.5 KB)
|
|
Click On Picture
|
SOLD Stainless Steel Single Shell Tank- 2,000 Gallon
|
Mfg: Not Specified
|
Model:
|
Stock No: OI263.
|
Serial No:
|
Stainless Steel Single Shell Tank- 2,000 Gallon. Tank material of construction: 304 grade stainless steel (304SS). Manway: 16 in. dia. Foxboro Liquid Level Transmitter, Model: 13FA1, S/N: 1437312, diaphragm: stainless steel, range: 0-89 in. H2O, MAWP: 150 psi@ 350 deg. F. Inlets: (1) 1 in. dia. flanged port, (1) 2 in. dia. flanged port, (2) 3 in. dia. flanged ports, (1) 4 in. dia. flanged port, (1) 6 in. dia. flanged port. Outlets: (1) 3 in. dia. flanged port. Overall dimensions: 96-1/2 in. dia. x 12 ft. 4 in. H. SOLD
|
Click here for more information (162.0 KB)
|
|
Click On Picture
|
SOLD 2002 Permian Fabrication & Service Vertical Stainless Steel Heated Tank - 1000 Gallons
|
Mfg: Permian Fabrication & Service
|
Model:
|
Stock No: GANF139.20
|
Serial No: 3132-E
|
2002 Permian Fabrication & Service Vertical Stainless Steel Heated Tank. Approximate capacity: 1000 gallons. Shell thickness: 10 gauge. Head thickness: 10 gauge. Inside straight wall dimensions: 4 ft. 6 in. Dia. x 9 ft. L. Number of coil rows: 7. Coil size: 2 in. Inlets: (2) 2 in. dia. ports, (1) 3/4 in. dia. port, (2) 1 in. dia. ports. Outlets: (1) 2 in. dia. port, (1) 1 in. dia. port, (1) 4 in. opening on top for shaft. Overall dimensions: 6 ft. L x 6 ft. W x 13 ft. 4 in.(HB1)(ACN350). SOLD
|
Click here for more information (210.3 KB)
|
|
Click On Picture
|
SOLD Cone Bottom Stainless Steel Tank – 2000 Gallons
|
Mfg: Not Specified
|
Model:
|
Stock No: TACJ0672.10
|
Serial No:
|
Cone Bottom Stainless Steel Tank. Approximate capacity: 2000 gallons. Inlets/outlets: (1) 1 ft. 10 in. dia. manway. (1) 8 in. port. (1) 3 in. pipe port. (1) 1 ft. 1 in. inner dia. flange with (6) 3/8 in. mounting holes. Tank dimensions: 8 ft. straight wall x 6 ft. dia. Overall dimensions: 12 ft. 4 in. L x 6 ft. 2 in. W x 6 ft. 6 in. H. SOLD
|
Click here for more information (226.2 KB)
|
|
Click On Picture
|
SOLD Walker Stainless Equipment Company Mix Tank- 1000 Gallon
|
Mfg: Walker Stainless Equipment Company
|
Model: PZ-CB-304SS
|
Stock No: TNCP001.20
|
Serial No: 676
|
Walker Stainless Equipment Company Mix Tank -1000 Gallon. Model: PZ-CB-304SS. S/N: 676. Material of construction: 304 Stainless Steel. This unit was designed as a jacketed tank, but the jacket leaks. Inside straight-wall dimensions: 6 ft. dia. x 4 ft. 7 in. H. Scraper Dimensions (8): 6 in. L x 4 ½ in. W. Baffle Dimensions (1): 7 in. W x 3 ft. 6 in. H Toshiba Electric Motor with Gear Drive, 10 hp, 1745 rpm, 230/460 V, 24/12 amps, 60 Hz, 3 phase. Inlets: (1) 1 ½ in. dia. S-line, (2) 2 in. dia. S-line, (1) 2 in. dia. ACME, (1) 2 ½ in. dia. ACME, (1) 3 in. dia. S-line, (1) 3 in. dia. (1) 4 in. dia. ACME. Outlets: (1) 1 ½ in. dia. (1) 3 in. dia. (1) 3 in. dia. flanged port (product). Overall dimensions: 6 ft. 6 in. L x 6 ft. 6 in. W x 10 ft. 5 in. H. (ACN350).
SOLD
|
Click here for Drawings (2,577.6 KB) Click here for more information (667.1 KB)
|
|
Click On Picture
|
SOLD Stainless Steel Vertical Storage Tanks - 1000 Gallons
|
Mfg: Not Specified
|
Model:
|
Stock No: HGPS1042.22
|
Serial No:
|
(3) Stainless Steel Vertical Storage Tanks. Inside dimensions: 4 ft. dia. x 10 ft. high. Approximate capacity: 1000 gallons. Quantity available: 3. Features: half-moon flip lids, cone bottom, center outlet, top inlet, square tubing skid base. Inlet port: 1.5 in. tri-clamp fitting. Discharge: 4-bolt flange, 5 in. OD, 1 5/8 in. ID. Overall dimensions: 4 ft. L x 4 ft. W x 11 ft. 3 in. H. SOLD
|
Click here for more information (265.2 KB)
|
|
|
|
|