D & W Dimple Jacket Welding Stainless Steel Tank-775 Gallon

D & W Dimple Jacket Welding Stainless Steel Tank-775 Gallon

D & W Dimple Jacket Welding Stainless Steel Tank-775 Gallon. S/N: 3944. National Board: 184. Design shell: 75 psi at 350 °F, jacket: 150 psi. Test shell: 115 psi, jacket: 115 psi. Agitator: Pace Maker motor, 10 hp, 1725 rpm, 230/460 V, 24.4/12.2 amps, 60 cycles, 3 phase. Motor drive, output: 155 & 52, reducer ratio: 11.49, final rpm: 150. Bottom of agitator is suspended approximately 6 inches above bottom of tank. Temperature gauge. Mixer shaft: 2-1/2 in. diameter x 92 in. L., propeller: 30 in. L., (4) baffles. Manway: 15-3/4 in. diameter. Tank inlet: 5 in. diameter, flange: 10 in. diameter with (8) hole, center to center: 8 in. L., inlet: 2 in. diameter, flange: 8 in. diameter with (4) hole, center to center: 7 in. L., 1-1/2 in. pipe. Center/Bottom Outlet: 3 in. NPT reduced to 2 in. NPT. Overall dimensions: 61 in. diameter x 16 ft. 3 in. H.

Product Details

  • Product ID: 6051
  • Stock No: DTWA401.34a
  • Manufacturer: D&W
  • Serial Number: 3944

Tank Details

  • Stainless Tank Type: Processing Tanks
  • Tank Orientation: Vertical
  • Jacketed (Insulated)? Yes
  • Dimpled? Yes
  • Agitation? Yes
  • Tank National Board Number: 184
  • Tank MAWP (PSI at temp): 75 psi @ 350 °F
  • Tank Inlets & Outlets Description: Tank inlet: 5 in. diameter, flange: 10 in. diameter with (8) hole, center to center: 8 in. L., inlet: 2 in. diameter, flange: 8 in. diameter with (4) hole, center to center: 7 in. L., 1-1/2 in. pipe.

Previous Refrigerant

Motor Details

  • Motor Included? Yes
  • # Motors: 1
  • Motor Manufacturer: Pace Maker
  • Motor Horsepower(HP): 10
  • Motor RPM: 1725
  • Motor Voltage: 230/460
  • Motor Amps: 24.4/12.2
  • Motor Hertz (Hz): 60
  • Motor Phases: 3

Dimensions:

  • Width (Inches): 61
  • Height (Inches): 195

Additional Product Details

  • Year of Manufacture: 1966

D & W Dimple Jacket Welding Stainless Steel Tank-775 Gallon

Save 9%

Price:
$5,000 $5,500
Sell Similar Items

How to get a Quote:

  • Add all items to your Quote
  • Click "Get My Quote"
  • Fill out Contact Information
  • Click "Request Your Quote"
  • Our friendly team will contact you ASAP!

You may also like

Recently viewed