Miscellaneous Conveyors

Conveyor Section with Reject Mechanism. Belt dimensions: 48 in. L x 12 in. W. Reject mechanism pneumatically operated; (2) sensors. Baldor motor: 5 hp, 1,725 rpm, 208-230/460 V, 1.9/.9 amps, 60 Hz, 3 phase. Ideal for placement immediately after metal detectors and checkweighers for defective product ejection. Overall dimensions: 4 ft. L x 4 ft. 10 in. W x 2 ft. 9 in. H.(H16).

Conveyor Section with Reject Mechanism. Belt dimensions: 48 in. L x 12 in. W. Reject mechanism pneumatically operated; (2) sensors. Baldor motor: 5 hp, 1,725 rpm, 208-230/460 V, 1.9/.9 amps, 60 Hz, 3 phase. Overall dimensions: 62 in. L x 55 in. W x 33 in. H. Ideal for placement immediately after metal detectors and checkweighers for defective product ejection.

Minnesota Automation Squeezer Conveyor. Model Leak Detectors, 4 in. W knuckle type belt, baldor motor 1 to 2 hp, 30 rpm-final, 220-440 V, 80 psi. Overall dimensions 12 ft. L x 3 ft. W x 8 ft. H. Quantity: 4

Stainless Steel Conveyor Frame

Stainless Steel Table Top Conveyor with Photo Sensor. (2) Wooden chain rails 120 in. L for use with a maximum 4-1/2 in. chain. Sprocket: 1-5/8 in. W x 6 in. dia. x 3/4 in. space between sprocket teeth. Overall Dimension: 137 in. L x 10.75 in. W x 11.25 in. H.

Table Top Conveyor with Adjustable Legs. 6 in. conveyor chain with a 4-1/2 in. Max product width. Infeed/Outfeed height: 33-1/2 in. Baldor Motor: ½ hp, 1750 rpm, 180V, 2.9 amps, 3 ph. Winsmith Drive: 10 Ratio, 175 Final rpm, 617 in./lb. torque. Overall Dimensions: 128 in. L x 20 in. W x 49 in. H.

Stainless Steel Table Top Conveyor Extension with Work Table. Max Conveyor Belt Width: 4-1/2 in. Work Table Size: 18 in W x 120-1/2 in. L with a 4 in. high lip on edges. Overall Dimensions: 121 in. L x 25 in. W x 11 in. H.

Stainless Steel Table Top Conveyor Extension. This unit has a stainless steel bottom shield. Conveyor uses a chain with a maximum width of 4-1/2 in. and sits on guides made of stainless steel covered in rubber. Overall Dimensions: 121 in. L x 5-1/2 in. W x 11 in. H.

AMBEC Stainless Steel Table Top Conveyor Extension w/ Dual Dayton Polishers/Cleaners. 4-1/2 in. Maximum conveyor belt width. Dart Speed Controller. Dayton Polishers: 90V, 1.5 amps. Overall Dimensions: 154 in. L x 36 in. W x 18 in. H.

AMBEC Stainless Steel Table Top Conveyor Extension. Unit has guide rail brackets. Maximum conveyor chain width is 4-1/2 in. Overall Dimension: 121.25 in. L x 11 in. W x 9.25 in. H.

AMBEC Stainless Steel Conveyor Extension. Last used by Turtle Wax Company. 4-1/2 in. Conveyor belt width 2-1/2 in. spacing between each side under belt. (4) ½ in. bolt holes on each end of conveyor for easy add-on to another unit. Overall Dimensions: 121 in. L x 5 in. W x 6-1/2 in. H.

Stainless Steel Table Top Conveyor with Work Table. Unit features a 120 in. L x 21 in. W work table. Sprocket diameter of 1-5/8 in. and a 3/4 in. pitch. Infeed height 34.5 in. Max product width 3.5 in. Baldor Industrial Motor Model: CDP3436, 75 hp, 1750 rpm, 180 volts, 3.7 amps. Gear Box Ratio 30, Torque 691 in./lbs. Hoffman Electric Box. Model: A-10086CH. (2) power outlets. Overall Dimension: 146 in. L x 29.5 in. W x 45.5 in. H.

Stainless Steel Table Top Conveyor with Diverter. Conveyor uses a 4-1/2 in. chain. Clippard Minimatic piston for activating diverter. (4) bolt holes on each end for attaching additional sections or adding to an existing line. Overall Dimensions: 122 in. L x 11 in. W x 10 in. H.

S-Shaped Stainless Steel Frame Transfer/Accumulation Conveyor. S/N: 600-016. Height at conveyor inlet/outlet: 32 in. H. Conveyor uses a 24 ft. L x 31 in. W. Intralox plastic link belt. AC Tech Intelligent drive control with touchpad controls and digital display. Baldor Industrial Motor: 2 hp, 1725 rpm, 208-230/460 V, 6.5-6.2/3.1 amps, 60 Hz, 3 phase. Sumitomo SM-Cyclo Motor Drive: 25 ratio, 1750 rpm (input), 69 rpm (output), 2380 in-lb. torque. Overall dimensions: 23 ft. 6 in. L x 72 in. W x 61 in. H.

Conveyor

Stainless Steel Spiralveyor. Spiral slide dimensions: 19 in. dia. x 91 in. L. Product access width: 6 in. Pitch: 18 in. 4-Level. (4) Wheels for easy maneuverability. Infeed height: 100 in. Exit height: 13 in. Overall dimensions: 46 in. L x 44 in. W x 100 in. H.

Fusi Electric Discharge Conveyor. Item FVR-G5. Source AC 380 hz 50/60. Output current 12. S/N 078391S010, Its for a low ratio discharge conveyor. Overall measurements: 9 in. W, 9-½ in. L, 16 in. H.

Neoprene 135 degree turn conveyor, overall 42 inch height x 64 inch length x 42 inch width, belt 17 inch width with 73 inch outer circum 35 inch inner circum, legs 34 inch height to base, Sew-Eurodrive motor type DFT71D4-K8 0.5hp 1700rpm, 565 torque.(H17).

PDC , Model 75C-ER, S/N 110, 240 volts Single Phase, 1-½ hp, Conveyor 127 in. L x 3 in. W, 85 in. H x 50 in. W x 127 in. L.

1996 Langguth Cold Wet Glue Pail Labeler. Model: E23. Maximum capacity: 100 containers per minute. Adjustable magazine compensates labels in sizes from 175 mm to 395 mm in length. Input: 460 volt, 60 Hz, 5 amps, DC Output: 24 volt, 12 V. AC Output 24 V. The machine is set up to run round containers as well as rectangular jugs with label over 2 sides, all with cold glue. Overall dimensions: 5 ft. 9 in. L x 3 ft. W x 5 ft. 8 ½ in. H.(ACN700).

Timing Conveyor. Conveyor is disassembled in 2 parts. Electric Box: Underwriters laboratories (Hoffman), Cat No. A-8064CHNFSS. Enclosure Type: 4.4X.12. (2) KB Electronics DC Motor Speed Control. Model KBPC-240 D. Input: 120/240 V, 15 amps, 50/60 Hz. Output: 10.2 amps (DC). (2) Dayton DC Gear Motor: .1 hp, CV 20, 90 V, 0.6 amps, 109 rpm, 27 (lb-in) torque. Ratio: 16.5. (3) Legs: 22 in. H (1st part). (2) Legs: 18-½ in. H (2nd part). Dimensions: (1st part): 33-½ in. L x 26 in. W x 41 in. H. Dimensions for 2nd part: 35-½ in. L x 9-½ in. W x 29 in. H.

Transfer Conveyor. Stainless steel. Conveyor is designed to provide multiple feeding positions. Height is adjusted by crank. Belt width: 15 in. W. Belt type (top): leather. Belt type (bottom): KVP Ram Industries-821 (Acetal grey). Height at conveyor inlet (adjustable): 50 in. Height at conveyor outlet: 32 in. Top conveyor has a magnetic bottom. (2) Sew-Eurodrive Motors, 1/2 hp, 1700 rpm, 280/460 V, 1.85/1.07 amps, 60 Hz, 3 phase. Bonfiglioli Tipo Motor Drive (top conveyor), 14 ratio, 121 rpm (final). Bonfiglioli Tipo Motor Drive (bottom conveyor), 28 ratio, 60.71 rpm (final). Overall dimensions: 12 ft. 4 in. L x 26 in. W x 70 in. H.

Conveyors, stainless steel Frame & plastic chain, Including stainless steel pack off station.

1st section: Conveyor, Laughlin Corporation. Model PCC375, S/N 3300533. 5 in. Frame, approximately 117 in. total belt length. Overall dimensions: 10 in. W, 63 in. L, 15 in. H. 2nd section: Vertical Belt Conveyor, Laughlin Corporation. Model SKBCE12, S/N 2700423. Has 2 in. deep blades on belt with 7-¾ in. Between each blade. Usable belt area 40 in. Total belt length 88 in. (11 blades). No motor, no drive. Legs (4) 9 in. adjustable. Overall dimensions: 16 in. W, 46-½ in. L, 43 1/2 in. H.

Double Drop Stainless Steel Conveyor. Uses (2) 11-1/2 in. W plastic conveyor belt. This two-level system has a 4 in. drop from top conveyor to bottom conveyor. Sunshine Control box. BIMBA air controlled piston for choosing left or right side exit port. Baldor Industrial Motor, 1/2 hp, 1750 rpm, 90 V, 4.8 amps. Hub City speed reducer, ratio:50, final speed: 35 rpm. Discharge height: 50 in. Inlets: (1) 13-1/4 in. x 8-1/2 in. infeed. Outlets: (2) 6 in. W x 5 in. L outlet ports. Overall dimensions: 61 in. L x 36 in. W x 89 in. H.

Shuttleworth Slip-Torque System. Rollers: 9-1/4 in. Conveyor: 81 in. L. Reliance motor: 1/2 hp, 1,725 rpm, 208/230/460 V, 2.2-2.2 amp, 60 Hz. Morse transmission. S/N 186HK5684. Ratio: 15. Overall dimensions: 81 in. L x 22 in. W x 32 in. H.

Conveyor Section with Reject Mechanism. Belt dimensions: 48 in. L x 12 in. W. Reject mechanism pneumatically operated; (2) sensors. Baldor motor: 5 hp, 1,725 rpm, 208-230/460 V, 1.9/.9 amps, 60 Hz, 3 phase. Overall dimensions: 62 in. L x 55 in. W x 33 in. H. Ideal for placement immediately after metal detectors and checkweighers for defective product ejection.

Tonko Stainless Steel Bottle Washer/Rinser. Maximum aperture/clearance: 4 in. W x 13 in. H. Sew-Eurodrive Motor, 5 hp, 1680 rpm, 230/460 V, 13.6/ 6.8 amps, 60 Hz, 3 phase. Sew-Eurodrive Gear Drive, 9.27 ratio, rpm in/out: 1680/181. Sew-Eurodrive Motor, 0.5/0.75 hp, 2250/450 rpm, 230/460 V, 3.05/1.53 amps, 60 Hz, 3 phase. Sew-Eurodrive Gear Drive, 10.31 ratio, 2250/450 rpm in, 218/44 rpm out. Conveyor infeed height: 4 ft. Conveyor exit height: 8 ft. 5 in. Overall dimensions: 23 ft. 5 in. L x 3 ft. 10 in. W x 9ft. 9 in. H.

Kusters-Water Stainless Steel Dewatering Conveyor. Model: FSM Filter Screen. Perforated filter screen design with rotating brush cleaner. Also has lifting fingers for larger pieces. Designed to be used in an inclined position 50, 60, or 75 degrees. Stainless steel construction. Wastewater flows through the screen while contaminants are captured and transferred away.